Fieldserver ControlNet FS-8700-104 Manual de usuario descargar pdf (Pagina 3)

FS-8700-104_ControlNet_X30 Manual Page 3 of 13

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

1 CONTROLNET X30 DESCRIPTION

The FieldServer ControlNet X30 driver can be used to emulate a single slave station on a ControlNet network.

ControlNet scanners can open a connection of up to 450 Bytes in each direction to the FieldServer. Data transfers

are via Scheduled Communication and therefore the FieldServer has to be scheduled on the ControlNet network

using a Network Configuration Tool such as RSNetWorx or RSLogix. The minimum supported network update time

(NUT) is 5 ms. Connection to the ControlNet network is via two standard BNC connector ports. The connection

may be to either one or both of the ControlNet ports. A connection to both ports provides dual redundant

operation. A Network Access Port (NAP) is also provided for the temporary connection of a Network Configuration

Tool.

Max Nodes Supported

FieldServer Mode

Nodes

Comments

Server

The FieldServer can only emulate one ControlNet Slave station

2 DRIVER SCOPE OF SUPPLY

2.1 Supplied by FieldServer Technologies for this driver

FieldServer Technologies PART #

Description

X30-ControlNet

Anybus ControlNet Card

2.2 Additional files Required for the Driver

Filename

Comments

Config.csv

Template loaded if no custom configuration ordered, otherwise Custom configuration loaded.

ControlNet

eds file

Required for working with Rockwell’s RSNetworx Tool. Supplied with the FieldServer and also

available via the following link: http://www.fieldserver.com/techsupport/utility/utility.php

2.3 Provided by the Supplier of 3

Party Equipment

2.3.1 Required 3

Party Software

RSNetWorx, RSLogix or another Network Scheduling Tool.

2.3.2 Required 3

Party Configuration

Connection to a properly terminated ControlNet network.

Always Loaded By FieldServer Technologies

1 2 3 4 5 6 7 8 ... 12 13

Sin comentarios

Fieldserver ControlNet FS-8700-104 Manual de usuario Pagina 3